The LokPilot 5 micro DCC is
the "twin" of the LokPilot 5
micro. With just 8.0mm x
7.0mm and a thickness of
only 2.4mm (on the
capacitor: 2.9mm), just so
small that it can also be
accommodated in very small
locomotives of nominal sizes
Z, N or TT, it is a pure DCC
Decoder. This lack of
flexibility is rewarded with
a lower price.
LokPilot 5 micro DCC
decoders are available with
all common interfaces. The
variants with Next18 or
PluX16 interface are a bit
larger with a base area of
13.0mm x 9.2mm, but have 2
additional function outputs.
Modes
The LokPilot 5 micro DCC is
a "pure-bred" DCC decoder.
14 to 128 speed steps are as
natural as 2- and 4-digit
addresses. Up to 32
functions can be triggered.
Thanks to Rail¬ComPlus®, the
decoders log on to a
suitable DCC System fully
automatically.
It masters all DCC
programming command
stations. Auxiliary
registers exist for DCC
systems that can only
program CVs from 1-255.
The LokPilot 5 micro DCC
decoder recognizes the
Märklin® braking sections as
well as ZIMO® HLU / ZACK
commands or the Lenz® ABC
system. Braking with DCC
brake modules or with DC
voltage is also possible. It
also stops with a Selectrix®
brake diode. An ABC
automatic shuttle train
enables automatic commuting
between two stations.
The LokPilot 5 DCC decoder
can be used on analog DC
trains. The maximum speed
can be set separately.
The decoder switches between
the operating modes fully
automatically "on-the-fly".
Features
We know that you want your
locomotives to be as
realistic as possible.
Therefore we have the
LokPilot 5 micro DCC
equipped with an amazing
number of function outputs.
The variants with 6-pin or
8-pin Wiring harnesses offer
4 amplified function
outputs, each with 180mA
output current and two logic
level outputs. The versions
with Next18 or PluX16
interface have a total of 6
amplified outputs and two
logic level outputs
available. All important
lighting effects are
available. The brightness of
each output can be adjusted
separately. The decoder
masters automatic pushing
and pulling when uncoupling
for ROCO®, Krois® and Telex®
couplings.
Motor control
The motor control of the
LokPilot 5 micro DCC has
been fundamentally improved
again. A variable adjustable
PWM clock frequency from
10kHz to 50kHz ensures super
quiet operation, especially
with bell-armature motors-
The typical “hum” is a thing
of the past. The load
control now has up to 10
CVs which can be adjusted
for difficult cases. The
unique "Autotune" function
enables the automatic
calibration of the decoder
to the motor. The LokPilot 5
DCC decoder delivers up to
.75A of motor current.
Enough juice for most
motors.
Safety
A PowerPack to bypass dirty
track can be fitted to the
LokPilot 5 micro.
Protection
Of course, the motor output
and the function outputs are
against overload protected.
We want you to enjoy your
decoder for as long as
possible.
